This is permiting 0.0.0.0 only, remember the default mask is 0.0.0.0, exact match. Dave
Ruihai An wrote: > > Group, > > I have seen this "access-list 1 permit 0.0.0.0" with route-map a couple of > times and had trouble to find a definite answer. Some place on Cisco web > site say this is permit EVERYTHING, some place says permit NOTHING. Can > anyone explain this? > > Thanks > > Ruihai > > router bgp 3 > redistribute ospf 2 match internal external 1 external 2 route-map filter1 > > access-list 1 permit 0.0.0.0 > access-list 2 permit any > ! > route-map filter1 deny 10 > match ip address 1 > ! > route-map filter1 permit 20 > match ip address 2 > ! -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41867&t=41867 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
