I found another link http://www.cisco.com/warp/customer/707/ios_804.html that shows router-to-router with a DHCP address. Combining the documents, it seems like this will work. I'll post the conclusion once I've tested it.
A great big thanks to all who responded. Craig At 05:25 PM 4/22/2002 -0400, you wrote: >Ok, I found this link >http://www.cisco.com/warp/customer/110/dynamicpix.html for PIX-PIX when one >of the PIX has a DHCP address. Does anyone know whether this same setup >will work for router-PIX? (I'm going to test later, but if someone can >save me a headache, it's certainly appreciated. > >Thanks again, >Craig > >At 04:45 PM 4/22/2002 -0400, you wrote: > >Is it possible to setup a router to PIX VPN when the router is obtaining a > >dynamic WAN interface address (in this case ISDN dial-up)? > >If so, has anyone done this? How do you define the peer when you don't > >know the peer address? Is it possible to allow any host to create a tunnel > >provided that the pre-shared key is known? > > > >Thanks in advance for your comments! > > > >Craig Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42273&t=42262 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
