we have a couple hundred of those same 3524xl boxes running on console servers in cisco and have no problems...no special setup either.
Larry Letterman Cisco Systems [EMAIL PROTECTED] ----- Original Message ----- From: "Ed Moss" To: Sent: Sunday, April 28, 2002 4:50 PM Subject: Terminal Server to 3542 Switch Access Probelms [7:42802] > I am having a problem getting a CS-516 to reverse telnet to a 3524XL Switch. > > The 516 is running 10.3(7) and can reverse telnet to routers, a PIX and VPN > 3005 with no problem. > If I move a known good port from say a router to the 3524, it will not make > the connection. > > If I connect my PC serial port to the switch, it works great... the same > cable that works with the other devices. > I have tried several cables (all that work with other devices.. it should be > a rolled cable, but I also tried a straight through cable as well). I have > even tried other ports off the 516. > > Is there anything special about the console port, or config on the 3524? > Flowcontrol - Stop Bits??? > > Thanks > Ed Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42809&t=42802 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
