1. I want to configure DDR on 2600/3600 back-to-back: Router-A--------DDR----------Router-B What BRI modules do I need?
2. I have this setup; Analog Phone---Router-A------BRI------Router-B-----Analog Phone Both analog phones connected to VIC-2FXS in NM-2V Router A has VIC-2BRI-S/T-TE and Router-B has VIC-2BRI-NT/TE in NM-2V(another) The interfaces are up and L1/L2 is up. I came to know that this setup is only good for voice calls, no DDR, no IP would work on it. If that is correct, for at least voice call, how can I place the voice call on BRI if I cannot use an IPV4 session target in the dial-peer? PING Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43902&t=43902 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
