Amir, I would start here http://www.cisco.com/warp/public/107/hw-e1.shtml since you have as5300 they are probably balanced/120 ohms and terminate with rj45. Don't forget the cable as the all E1 nm modules terminate with 15pin D.
Best regards, Rah -----Original Message----- From: Amir Aziz [mailto:[EMAIL PROTECTED]] Sent: 11 May 2002 06:21 To: [EMAIL PROTECTED] Subject: require module info on 3600 series router [7:43925] Hi everybody, I am here in Pakistan and we have E1 running at our ISP setup. OUR Telco provide E1 facility on G703/704I want to terminate these E1 lines directly into my router currently I am using CISCO 5300 for that purpose but I need compatiable module for my 3600 series routers as well can anyone tell me the module details or module number to use in my router I will be very thankful to the person/s. Regards, Amir Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43930&t=43925 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
