Two other things. This is only a problem (as far as I know) on the older 1900s with the DB-9 console port. The other issue, and I have sorta confirmed it, is that you can't load anything older than about 5.37 on the older 1900s. I was able to do that with my old 1924, but it gags when I try to upload 9.0. If anybody has any additional info on the limitations of the older 1900s, please post because I can't find anything more on CCO.
Sincerely, John Dorffler CCIE #6677 ""Justin M. Clark"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Cisco ws-c1900 switch. Using db9F-rollover-db9F or null modem cable I can > connect to the console port and get into Diag Console fine, but when I try > to just plug in and configure the switch it just starts spitting out > "ATQ0H0" in hyperterminal PE. I hunted around and a couple places that I > found said try updating the firmware. So I hit cisco's site and downloaded > "cat1900A.9.00.04.bin" which was the only 1900 firmware I could find, The > previous version was 5.34. So anyway, I did the XModem firmware upgrade, as > soon as it asks me to send the file it kicks back an error that says > "Transfer cancelled by remote system" (convenietly after it has erased > existing firmware) and then prints out: > Operation firmware version: 0.00 Status: Invalid > Boot firmware version: 1.10 > WARNING!!! Operation Firmware is invalid. > Upgrade firmware to enable switch operation. > > Im stuck at this point, does anyone know what to do or how to get a copy of > the firmware that works on this switch? and then at that point what kind of > cables, etc do i need to configure the darn thing. > > If anyone can get back to me in a hurry or has a version of the firmware > that DOES work on this model it would be greatly apprecieated as this switch > is dead in the water, along with the LAN that is suppost to be connected to > it. > > Thanks, > Justin Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44719&t=44719 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
