Another possible problem (although the outputs that people have asked for
would help...)
Do you have "no keepalive" set? If you turn off keepalives, you will turn
off LMI from your router to the telco switch - which won't help your
connectivity much...
Could be worth checking with your telco how often they expect to see
keepalives and make sure your keepalive interval matches that - I think
the default is ten seconds.
JMcL
----- Forwarded by Jenny Mcleod/NSO/CSDA on 23/05/2002 12:26 pm -----
"Daniel Skripka"
Sent by: [EMAIL PROTECTED]
23/05/2002 10:33 am
Please respond to Daniel.Skripka
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
cc:
Subject: Fwd: no lmi - dlci inactive - telco says my problem?
[7:44774]
Is this part of a business decision process?:
No LMI indicates the telco frame switch is not seeing the frame
keepalives from the cisco.
1. Are both sides confirmed as using same frame relay encapsulation
[ietf/cisco]
2. What is the output of 'debug frame lmi'?
3. What is the output of debug serial interface?
4. Have you tried to do a shut/no_shut or a clear on the physical
interface after the loop test?
beth shriver wrote:
>
> Hello friends, I am having a little problem getting a
> new long distance frame relay circuit going and
> getting the ol "its your equipment" answer from telco
> and not sure if this is the case or not. I have
> checked cables and tsu/router config and all seems ok
> . when the telco loops my csu/tsu it causes my
> interface to "bounce" but interface then stays in
> interface UP protocol DOWN state. Telco is saying they
> see no LMI from my equipment. In the past when i seen
> no LMI it always turned out to be something on the
> telco side. I dont do frame relays much so i am kind
> of at the mercy of tech who is turning this circuit up
> so can someone give me some pointers on what i can
> look for to make sure it is not in my equipment ? or
> how i can tell if it is a telco issue with circuit?
> any replies would be greatly appreciated! fast replies
> appreciated even more!!! :)
>
> __________________________________________________
> Do You Yahoo!?
> LAUNCH - Your Yahoo! Music Experience
> http://launch.yahoo.com
Important: This e-mail is intended for the use of the addressee and may
contain information that is confidential, commercially valuable or subject
to legal or parliamentary privilege. If you are not the intended recipient
you are notified that any review, re-transmission, disclosure, use or
dissemination of this communication is strictly prohibited by several
Commonwealth Acts of Parliament. If you have received this communication in
error please notify the sender immediately and delete all copies of this
transmission together with any attachments.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44782&t=44774
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
