yeah aside from portfast I would suggest linux as well.... :) check this out...
11:20am up 487 days, 7:53, 1 user, load average: 0.08, 0.02, 0.01 hehe >>> "Frank Hafta" 05/23/02 10:43AM >>> I have had to start and stop DHCP in the Past. I run it on Linux now with no problems. ""Brian Zeitz"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I am having an issue with a 3550-24 Cisco switch and a windows 2000 > Network. DHCP is not working correctly, I get sephamore timeouts on a > lot of the workstations. I set the port and the servers to 100M Full. Is > there anything else I should be looking for? Could there be something > preventing DCHP from working right, maybe it is not allowing a > broadcast. Maybe it is something simple, I guess this is a newbie > question :-) thanks for your help in advance. >>>>>>>>>>>>> Confidentiality Disclaimer <<<<<<<<<<<<<<<< This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44833&t=44825 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
