That's a type 2 cable that connects to a router with a db9? Or is that RJ-45 on the 2521? Depends on how much time you want to spend on making/searching for a cable, I would suggest upgrading to a msau that uses rj-45. Cabletron hubs such as the STHI-24 are plentiful on ebay and probably will cost you about $15-20 bucks. You can pick some madge cards on ebay as well and connect your pcs to it as well. Plus, you can management the hub and if you have errors you can console into the hub and see what they are..IE burst, congestion, fc, etc. Of course, the sh controller command on the router will do the same thing.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Frankie Chiang Sent: Saturday, May 25, 2002 1:12 AM To: [EMAIL PROTECTED] Subject: Re: Token Ring cable [7:45018] You can make it by your self. http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2600/c26userg/cables. htm Best Regard, Frankie ""Kenneth Yeung"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > Just start to prepare home lab, I got token ring interface (C2521) and MAU > Hub. Where can I get the cable? What should I use? > Any comment! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45032&t=45018 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
