Hello, all... I have a PIX501 set up for PAT on one ip address through my cable modem.
I have a client on my internal network that needs to connect to a corporate extranet via IPSEC, using it's own client software (Nortel). In other words, there is no network-to-network or cisco-to-cisco IPSEC connections. The PIX simply passes the traffic. The problem is that I cannot get the client to connect through the PIX. I believe it's because the client needs its own statically translated address on the PIX (because when I use my only ip address, I can make it connect). However, the challenge here is to make it so that I can make this VPN client work through the PIX while still using PAT. This way, it doesn't hose all my other computers on the inside. Is this possible? I was thinking of a port address mapping statement, but I wouldn't know which ports to use. Anyone have any experience with this? Thanks, Eddie Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45197&t=45197 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
