I have configuration which looks like that:
ISP --> S1/0 S1/1 --------------> S0
C2620 C1720
Fa0/0 --> LAN Fa0 --> LAN 2
10.10.10.0/24 10.10.11.0/24
I configured NAT on C2620 to:
interface Serial1/0
ip nat outside
!
inteface Fa0/0
ip address 10.10.10.1 255.255.255.0
ip nat inside
!
ip route 0.0.0.0 0.0.0.0 Serial1/0
ip nat inside source list 1 interface Serial1/0 overload
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 1 permit 10.10.11.0 0.0.0.255
Now C1720 is connected to C2620 and computers connected
behind C1720's Fa0 have access to internet via C2620
is necessary to set 'ip nat inside' on interface Serial1/1
on C2620 ?
--
TMS
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45339&t=45339
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
