You ae correct in that you configure your bridge group on the physical and subinterface. You obviously have to configure bridging on some other interface like your LAN, send a copy of your config.
dave Mohannad Khuffash wrote: > > Dear Group, > I have a problem for implementing the bridging over the Frame Relay > subinterfaces, Cisco say that you should only enable the bridging over the > main interface and the subinterface, i have made that but the problem still > present! Any one have any idea about that. > Note: When i issue the show bridge group command it show me that every thing > is ok , and that the subinterfaces are in forwarding state. > > -- > > Mohannad N. Khuffash > Network Administrator > Palestine Telecom > Tel : 00970-09-2390509 -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45352&t=45336 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
