Hi Friends,
I am facing certian difficulties with X.25 setup. Would appreciate tips for
the same. The details of the setup along with the router configuration is
given below:
X.25 SCENARIO
The following is the scenario that we have tested for one our customers who
is implemented his network and wants to connect on x.25
We as a Service Provider have the connectivity as the following :
1133 1026 1024 1023
R1 ----------------------R2-------------------------R3
S 0/1 s 1/6 BRI 6/2 BRI 0/1
R1 2600
R2 3662
R3 7206 (CPE)
There are 2 routers R1 and R2 at our end which are directly connected back
to back on serial. Router1s Serial is been configured for x.25 and
necessary routes have been injected to reach R2. R3 is at the customers
premises which is dialing into R2 on a BRI interface and getting connected.
When R3 gets connected to R2 at the service providers end an SVC is
created, After the creation of SVC R1 gets a path to reach R3
Problem Scenario :
R1 is able to reach R2
pad 1026 is successful
Pad 1024 gives an error
R1 is unable to reach R3
Pad 1023 gives an error
R2 is able to reach R3
Pad 1023 is successful
R2 is able to reach R1
Pad 1133 is successful
R3 is able to reach R1
Pad 1133 is successful
l
The running configs of the routers is as below
R1# show runn
service pad to-xot
service pad from-xot
service tcp-keepalives-in
x29 profile abc 1:0 2:0 3:0 4:2 5:0 6:5 7:0 8:0 9:0 10:0 12:0 13:0 14:0 15:0
16:0 17:0 18:0 19:0 20:0 22:0
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45365&t=45365
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
