Gunjan, You can use an NM-1V or NM-2V in conjunction with an FXO or E/M card depending on your PBX config. There are several ways of doing this.
Sounds like you need to hire a consultant to help with the design and implementation. thanks, -Brad Ellis CCIE#5796 (R&S / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) ""Gunjan Mathur"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi All, > > I wanted to know the hardware requirement for enabling > cisco router for Voice. We are planning to buy 3600 > router and I'm not sure what card I buy to enable > this. > We are planning to connect PBX directly to router, > which mean VIC-2FXO is what I can think of but I could > not understand the utility of NM-2V, are we need this > to enable Voice over router? > Also if get T1 line then WIC-2T will server the > purpose or we need to buy anything else. or if we get > DSL connection then what card I need to start with. > > Regards, > > > > __________________________________________________ > Do You Yahoo!? > Yahoo! - Official partner of 2002 FIFA World Cup > http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45367&t=45358 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
