KS,

I've had similar problems with pixes.  Try using a different floppy disk.
If that doesnt work, open up the Pix and make sure the cables are connected
properly and the memory is seated correctly.  If that still doesnt work, try
replacing the DRAM (sounds strange, but bad DRAM causes interesting
problems). If that still doesnt work, try upgrading or downgrading the PIX
OS and try using the other password recovery file that goes along with that
OS. Let me know what happens.

thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)

""Karagozian Sarkis""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> We have a PIX 520 with Software Version 5.1(1)
> with a 1.44M  floppy drive.
> with 128M of DRAM
> and 4 ethernet Ports.
>
> Problem: I can Not recover the Enable password:
>
> Here is what happens:
> When I boot it up, It beep twice with long beeps, then another short beep.
> loads up to the normal prompt PIX520>> but I am locked out and Don't know
> the Enable password !!!
>
> So I tried the CIsco "Pasword Recovery and AAA Configuration Recovery for
> PIX " Document:
> and I downloaded the np5.1 file (for this Rev.) and the rawrite.exe (which
> creates a Pasword Lockout Utility Disk)
>
> When I insert the Utility Disk into the PIX floppy (Step 4 in Cisco Doc.)
and
> push the Reset button on on the front of the PIX ...
> it will reboot from the floppy and displays Booting Floppy
> .........................exec flop.
> but the cursor drops to the next line and hangs up there...(no more action
> but the Flopy LED stays lit )
>
> and it nerver displays "Erasing Flash Password. Please eject diskette and
> reboot" - that it is puposed to do...
>
> So I remove the Diskette and reboot the PIX, But still shows me the old
> PIX520>> prompt , and I am NOT able to
> get into the privilege Enable prompt#.
>
> Does anyone know how to over come this ?????
> thanks
> Sarkis Karagozian
> [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45403&t=45402
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to