Jimmy, When you use the password with the privilege commands you see parts of the running-config that privilege level 2 commands are able to configure. Which probably is nothing.
Refer to this link for assist.... Debbie http://www.cisco.com/warp/public/63/showrun.shtml --- Jimmy wrote: > Hi all : > > I have set a username "test" with privilege 2 for > "show running-config". > > However when I login using "test" and perform > show > running-config ; only 1st line and last line of the > configuration can be seen. Any idea ? > > > username cisco password 7 104D000A0618 > username test privilege 2 password 7 021201481F > ip subnet-zero > no ip domain-lookup > > privilege exec level 2 show running-config > privilege exec level 2 show > > > And the result is as below : > > > Building configuration... > > Current configuration: > ! > ! > ! > ! > end > > ABC-Demo-S'pore# > > cheers > Jimmy > > > __________________________________________________ > Do You Yahoo!? > Yahoo! - Official partner of 2002 FIFA World Cup > http://fifaworldcup.yahoo.com [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45825&t=45818 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
