Hi, I think this will work: I have a customer that would like to use two connections to the Internet (one sdsl and one frame) I want the two servers to use the DSL for Internet and the 20 users could use the Frame T1 (no BGP, not load balanced).
I want to use a Cisco 1720 with a serial wic for Frame and a module for the DSL. I will than use a Pix 506e behind the router. Can I configure the Pix to recognize traffic from the servers and tag it somehow so the router will send it out the DSL side of the 1720? The traffic from users would need to do the same but exit out the T1. Is this considered routing on the Pix side, or can I use access lists in some way to make this work? A friend of mine said this could be done, but I'm a little unsure. Thanks, Wayne Wayne Jang Advanced Computer Technologies, Inc. 108 Main Street Norwalk, CT 06851 Wk 203-847-9433 Cell 203-943-6603 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45857&t=45857 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
