Short answer: Yes, you can configure VPNs without the aide of the Accelerator card. Your VPN encryption will be DES only, unless you purchase a 3DES license and install it.
Good luck! Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, June 06, 2002 8:54 AM To: [EMAIL PROTECTED] Subject: pix and vpn [7:45934] I don't have a vpn accelerator card installed on my pix can I configure vpn ? Im trying to configure internet users ability to connect to my internal network Probably use this config http://www.cisco.com/warp/customer/110/pptpcrypto3.html any suggestions..? 0: ethernet0: address is 0090.2710.27df, irq 11 1: ethernet1: address is 0090.270d.c12c, irq 10 2: ethernet2: address is 0090.2710.46a2, irq 15 Licensed Features: Failover: Enabled VPN-DES: Enabled VPN-3DES: Disabled Maximum Interfaces: 6 Cut-through Proxy: Enabled Guards: Enabled URL-filtering: Enabled Inside Hosts: Unlimited Throughput: Unlimited IKE peers: Unlimited Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45946&t=45934 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
