Shawn you're dead right, sorry 3620, can't touch the image I'm afraid as it's a managed router. I too have searched through the CCO and couldn't find anything that documents this,
Cheers Pat -----Original Message----- From: Shawn Heisey [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 11, 2002 5:18 PM To: Patrick Donlon Cc: [EMAIL PROTECTED] Subject: Re: 3600 10MB port duplex? [7:46250] Patrick, I'm thinking that you actually mean a 2610. I've never heard of a 3610. Yes, 10Mb ports on 2600 routers will do full duplex. 12.0(4)T minimum IOS is required. I had problems with it at 12.0(7)T ... recommended IOS would be 12.1 mainline or 12.2 mainline. If duplex is not configured, it will run at half. I haven't been able to locate a public page stating this, but I know from experience that it can do it. Thanks, Shawn Patrick Donlon wrote: > > Hi All > > I've a dead simple question for anyone with a 3610 at their disposal, > I'd like to know whether the built in 10MB ethernet port will run at > full duplex. Reason why is I don't have a 3610 with one of these I can > access and I've been told by AT&T that their router will only run at > half-duplex and 10MB _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46269&t=46250 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
