Is the phone in SRST mode?
""pankaj kulkarni"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi! > This is my setup: > 7910--- > |Switch|--|LabRouter|--Internet---|AS53xx|--PSTN > CM----- > > I want all calls beginning with 1 and followed by 10 digits to be sent to > the AS53xx. > In the Call manager, I created : > 1) AS53xx as a H.323 Gateway with H.225 as control protocol. > 2) route pattern - 1XXXXXXXXXX, > 3) "Route This pattern", > 4) Gateway - IP address of the AS53xx > 5) Discard Digits - None > > The As53xx has been configured as an open switch. > > I'm unable to call..i get a reorder tone on the phone. > After turning on debugging on the lab router, > I see that the CM first establishes a TCP connection with the AS53xx, > After that, the IP Phone keeps trying to establish a connection on port 2000 > of the LabRouter and keeps getting a RST, since there is nothin listening on > that port - this is what i dont understand. Why is the IP phone trying this > connection?I know its a skinny protocol port, but i shouldnt have to > configure anything on the LabRouter, rite?If i do need to, could anyone tell > me why? > > I also have the detailed Trace of the call...its very long and if anyone > wants it, i can paste it.But i think some experts might be able to point out > the configuration required to make this work! > > > > > > Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com > Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from > http://www.planetm.co.in Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46291&t=46287 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
