Like I said in my previous post similar to Brad's... It'll PROMPT you about if you want to change/add any new features/configurations. Can't remember the syntax exactly, but it's the only question prompt you get before it does the "Saving to flash..."
It's really that simple. When you answer yes, it will then prompt you for your key... And you will enter in each of the sets of alpha-numerics one line at a time... i.e.: boot> c3g4lz then hit enter boot> hit enter boot> hit enter boot> and so on, and so on, until your finished. It will then finish the "Saving to Flash..." bit after that. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Rick Sent: Thursday, June 13, 2002 10:35 PM To: [EMAIL PROTECTED] Subject: Re: PIX 501 Upgrade [7:46519] I have not been able to find a way to upgrade mine from DES that it came with to a 3DES that I purchased. According to the docs the only way to upgrade the license is to reinstall the OS and it recommends upgrading at the same time. How do I enter the key? Cisco PIX Firewall Version 6.1(2) Cisco PIX Device Manager Version 1.1(2) Compiled on Fri 16-Nov-01 14:28 by morlee pixfirewall up 10 days 22 hours Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz Flash E28F640J3 @ 0x3000000, 8MB BIOS Flash E28F640J3 @ 0xfffd8000, 128KB 0: ethernet0: address is 0009.7c48.c239, irq 9 1: ethernet1: address is 0009.7c48.c23a, irq 10 Licensed Features: Failover: Disabled VPN-DES: Enabled VPN-3DES: Disabled Maximum Interfaces: 2 Cut-through Proxy: Enabled Guards: Enabled Websense: Enabled Thanks, Rick ""Brad Ellis"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Rick, > > You do NOT need to upgrade your PIX to run 6.2 OS, here's my pix 501 I'm > using with 6.2(1) and 3DES: > > brad-vegas# sh ver > > Cisco PIX Firewall Version 6.2(1) > Cisco PIX Device Manager Version 1.1(2) > > Compiled on Wed 17-Apr-02 21:18 by morlee > > brad-vegas up 2 days 0 hours > > Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz > Flash E28F640J3 @ 0x3000000, 8MB > BIOS Flash E28F640J3 @ 0xfffd8000, 128KB > > 0: ethernet0: address is 0008.a3f7.c052, irq 9 > 1: ethernet1: address is 0008.a3f7.c053, irq 10 > Licensed Features: > Failover: Disabled > VPN-DES: Enabled > VPN-3DES: Enabled > Maximum Interfaces: 2 > Cut-through Proxy: Enabled > Guards: Enabled > URL-filtering: Enabled > Inside Hosts: 10 > Throughput: Limited > IKE peers: 5 > > > thanks, > -Brad Ellis > CCIE#5796 (R&S / Security) > Network Learning Inc > [EMAIL PROTECTED] > www.optsys.net (Cisco hardware) > > ""Rick"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Has anyone upgraded a PIX 501. All of the current 6.x > > files all say they require 32meg DRAM and this 501 only has > > 16meg. The problem I have is I need to upgrade to a 3DES > > license and it requires that I load a new image and I don't > > want to take a chance with not being able to get the current > > releases to work. The funny thing is this came with 6.12 on it. > > Rick Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46546&t=46519 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
