Save a lot of money and go with 180 modems at 56k! ADSL is no where near as stable; I don't think they make a device that does combines then 2 ADSL lines.
Depends what your doing, this is probably not a good idea. Especially if you doing VPN, or any other kinds of 2 way communications. Cisco has just come out with a new DSL router, but the features for ADSL are still very new. You need a modem for each line, Maybe you could use a switch with layer 3 capabilities to do routing. A lot of times when you get ADSL you don't get an real IP, but a dynamicly assigned IP. Some ISP don't let you use 2 IPs on the same line. DNS is an issue. There are too many reasons to mention not to do this. But a good idea would be to get 1 ADSL line, and test your applications. I have 2 ADSL lines, and personally I would trade them in for a T1 any day of the week. ADSL is good for home users, and for maybe like a development environment. If you try to combine ADSL lines on 1 router, I think your going to come into even more issues. Again, depending on what you're doing at your site. What type of traffic you have, like is it time sensitive etc. Brian -----Original Message----- From: Hassan, Shehzad [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 18, 2002 12:36 PM To: Cisconsp (E-mail) Subject: [nsp] DS3 vs. Multiple DSL Would appreciate if anyone help me understand or point to links (technical/design issues) if someone opts to replace his DS3 with scores of ADSL lines (cost is a major factor, router interfaces etc) Thanks SH Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46915&t=46915 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
