Yeah you can do this.
You will need a 525 though. However, you only said 3 vlans but in your
heading you have 8 port. If the firewall is truly only checking the vlan
traffic and not performing any other routing, then you would only need 6
ports and can use a PIX 515E.
Theo
"Timo Graser"
Sent by: [EMAIL PROTECTED]
06/19/2002 07:22 AM
Please respond to "Timo Graser"
To: [EMAIL PROTECTED]
cc:
Subject: Re: can a 8 port pix act as 4 firewall? [7:46873]
U can do it without any problems, just use the outside
Interface(ethernet0) for the connection to the internet.
The other interfaces to the vlans should have higher security levels.
It is no difference than configuring with just one inside network.
Just remember Interfaces with the same Security Level cannot communicate.
It makes sense if u need higher security than just accesslists.
Kevin Banifaz wrote:
>Why would each vlan need it's own firewall. In what scheme are you using
>this? Why not use access-lists on your vlan router or RSM
>
>
>
>
>>From: "Manchu Warrior"
>>Reply-To: "Manchu Warrior"
>>To: [EMAIL PROTECTED]
>>Subject: can a 8 port pix act as 4 firewall? [7:46873]
>>Date: Tue, 18 Jun 2002 04:18:49 -0400
>>
>>a switch have 3 vlan,each vlan need a firewall,than i need 3
firewall,can i
>>use pix525 with 6 ports to do this,if yes,then how to do it? thank you!
>>
>>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=46958&t=46873
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
