I feel u need to check up for Hub as well as E-Card of boxes hanging -- whether 10baseT, 100baseTX and autonegotiation support and based on inputs change config accordingly if possible.
Kiran >From: "[EMAIL PROTECTED]" >Reply-To: "[EMAIL PROTECTED]" >To: [EMAIL PROTECTED] >Subject: losing connectivity [7:47063] >Date: Thu, 20 Jun 2002 10:54:27 -0400 > >Scenario... We have a 3640 connected to one T1. That then feeds a hub >with >two to three boxes hanging off it; then connects to a Checkpoint FW. The >problem, seems that the hub gets hosed up (technical term) and needs to be >reset.... this has been happening on and off for about 3 -4 months. When >we lose connectivity, from the outside, I can ping the Ethernet port on the >router, but I can't ping the box hanging off the hub. All users on the >inside cannot access anything outside the network. We've tried three >different hubs. Using a 2-Eth/2-WAN (NM-2E2W), I switched to the second >Ethernet port and it seemed to solve the problem (for a short time) but >it's >back again. > >Any help/insight is greatly appreciated.... this is driving me crazy. > > > Misc Box (IDS) > | > | >Cisco3640 --> Cisco Hub --> CheckPoint FW > >Thanx, >mike jablonski > > > > > > >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >Michael Jablonski >ABN AMRO Asset Management Holdings, Inc. >161 North Clark St. >9th Flr >Chicago, IL 60601-2468 >PH: 312.884.2996 >FAX: 312.278.5550 >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _________________________________________________________________ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47183&t=47063 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
