Think of it as a native IOS 6500. Same function with less performance.
""Eric R"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Just got a new 3550-EMI 24port. > Check the sh ip portion. Yep, it's an IP router! > Looks like this little bad boy could actually throw a rather large monkey > wrech into the works. > > -Eric > > ###################################################################### > > 3550-EMI#? > Exec commands: > access-enable Create a temporary Access-List entry > access-template Create a temporary Access-List entry > archive manage archive files > cd Change current directory > clear Reset functions > clock Manage the system clock > cluster cluster exec mode commands > configure Enter configuration mode > connect Open a terminal connection > copy Copy from one file to another > debug Debugging functions (see also 'undebug') > delete Delete a file > dir List files on a filesystem > disable Turn off privileged commands > disconnect Disconnect an existing network connection > dot1x IEEE 801.1X commands > enable Turn on privileged commands > erase Erase a filesystem > exit Exit from the EXEC > format Format a filesystem > fsck Fsck a filesystem > help Description of the interactive help system > lock Lock the terminal > login Log in as a particular user > logout Exit from the EXEC > mkdir Create new directory > more Display the contents of a file > mrinfo Request neighbor and version information from a multicast > router > mrm IP Multicast Routing Monitor Test > mstat Show statistics after multiple multicast traceroutes > mtrace Trace reverse multicast path from destination to source > name-connection Name an existing network connection > no Disable debugging functions > ping Send echo messages > pwd Display current working directory > rcommand Run command on remote switch > reload Halt and perform a cold restart > rename Rename a file > resume Resume an active network connection > rmdir Remove existing directory > rsh Execute a remote command > send Send a message to other tty lines > setup Run the SETUP command facility > show Show running system information > systat Display information about terminal lines > telnet Open a telnet connection > terminal Set terminal line parameters > test Test subsystems, memory, and interfaces > traceroute Trace route to destination > tunnel Open a tunnel connection > udld UDLD protocol commands > undebug Disable debugging functions (see also 'debug') > verify Verify a file > vlan Configure VLAN parameters > vmps VMPS actions > where List active connections > write Write running configuration to memory, network, or > terminal > > ###################################################################### > > 3550-EMI#sh ip ? > access-lists List IP access lists > accounting The active IP accounting database > aliases IP alias table > arp IP ARP table > cache IP fast-switching route cache > cef Cisco Express Forwarding > dvmrp DVMRP information > eigrp IP-EIGRP show commands > flow NetFlow switching > igmp IGMP information > interface IP interface status and configuration > irdp ICMP Router Discovery Protocol > local IP local options > masks Masks associated with a network > mcache IP multicast fast-switching cache > mpacket Display possible duplicate multicast packets > mrm IP Multicast Routing Monitor information > mroute IP multicast routing table > msdp Multicast Source Discovery Protool (MSDP) > nat IP NAT information > ospf OSPF information > pim PIM information > prefix-list List IP prefix lists > protocols IP routing protocol process parameters and statistics > redirects IP redirects > rip IP RIP show commands > route IP routing table > rpf Display RPF information for multicast source > sdr Session Directory (SDPv2) cache > sockets Open IP sockets > traffic IP protocol statistics > vrf VPN Routing/Forwarding instance information > > ###################################################################### > > 3550-EMI(config)#? > Configure commands: > aaa Authentication, Authorization and Accounting. > access-list Add an access list entry > alias Create command alias > arp Set a static ARP entry > banner Define a login banner > boot Boot Commands > bridge Bridge Group. > buffers Adjust system buffer pool parameters > cdp Global CDP configuration subcommands > class-map Configure QoS Class Map > clock Configure time-of-day clock > cluster Cluster configuration commands > default Set a command to its defaults > default-value Default character-bits values > define interface range macro definition > dnsix-dmdp Provide DMDP service for DNSIX > dnsix-nat Provide DNSIX service for audit trails > dot1x IEEE 802.1X subsystem > downward-compatible-config Generate a configuration compatible with older > software > enable Modify enable password parameters > end Exit from configure mode > errdisable Error disable > exception Exception handling > exit Exit from configure mode > file Adjust file system parameters > help Description of the interactive help system > hostname Set system's network name > interface Select an interface to configure > ip Global IP configuration subcommands > key Key management > line Configure a terminal line > logging Modify message logging facilities > mac Global MAC configuration subcommands > mac-address-table Configure the MAC address table > map-class Configure static map class > map-list Configure static map list > mls Global Multi-Layer Switching parameters > monitor Configure SPAN monitoring > mvr Enable/Disable MVR on the switch > no Negate a command or set its defaults > ntp Configure NTP > policy-map Configure QoS Policy Map > port-channel EtherChannel configuration > priority-list Build a priority list > privilege Command privilege parameters > process-max-time Maximum time for process to run before > voluntarily relinquishing processor > queue-list Build a custom queue list > rmon Remote Monitoring > route-map Create route-map or enter route-map command > mode > router Enable a routing process > rtr RTR Base Configuration > scheduler Scheduler parameters > sdm Switch database management > service Modify use of network based services > shutdown Shutdown system elements > snmp-server Modify SNMP parameters > spanning-tree Spanning Tree Subsystem > subscriber-policy Subscriber policy > switchcore switchcore configuration > system Set the system configuration > tacacs-server Modify TACACS query parameters > template Select a template to configure > tftp-server Provide TFTP service for netload requests > time-range Define time range entries > udld Configure global UDLD setting > username Establish User Name Authentication > vlan Vlan commands > vmps VMPS settings > vtp Configure global VTP state > > ###################################################################### > > 3550-EMI(config)#router ? > bgp Border Gateway Protocol (BGP) > egp Exterior Gateway Protocol (EGP) > eigrp Enhanced Interior Gateway Routing Protocol (EIGRP) > igrp Interior Gateway Routing Protocol (IGRP) > isis ISO IS-IS > iso-igrp IGRP for OSI networks > mobile Mobile routes > odr On Demand stub Routes > ospf Open Shortest Path First (OSPF) > rip Routing Information Protocol (RIP) > static Static routes Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47389&t=47322 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
