I have a scenario where I want to move part of two VLANs to a remote building off campus. These two VLANs are already part of my internal network and due to some layer 8 constraints, we cant put them on new subnets once we move them to the new building. The VLANs need to be at both the remote office as well as the core of the network. Connectivity will be facilitated by a T1 and a pair of 1721s. I know the 1721s will run 802.1Q, but can I bridge the two VLANs across the T1? I know its not a good idea to send broadcasts across an expensive T1, but were dealing with folks who do not care.
I wasnt sure how the WAN side would handle dot1q tagging. Thanks for any thoughts!! Jeff Reed Confidential e-mail for addressee only. Access to this e-mail by anyone else is unauthorized. If you have received this message in error, please notify the sender immediately by reply e-mail and destroy the original communication. 1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47440&t=47440 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
