I have never seen this before, any help is greatly appreciated. Received a
group of 7 routers today and was going through and wiping the NVRAM. I was
able to directly connect to all routers and perform the required tasks
except for one lone 2501. When connecting to the console line the router
would not accept any of the actual keystrokes. It is almost like I am
getting a random mapping to the keys on my computer. After rebooting I typed
the following keys n,,d,f,,,d,s,c, here is the
results, weird mappings that don't remain the same. I am using HyperTerminal
Personal Edition with the default settings(9600 baud, 8 databits, no parity,
1 stop bits, no flow control) to connect.
System Bootstrap, Version 5.2(5), RELEASE SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
2500 processor with 16384 Kbytes of main memory
F3: 6799388+89240+456028 at 0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-D-L), Version 12.0(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 24-Jan-00 22:06 by bettyl
Image text-base: 0x030387D0, data-base: 0x00001000
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 02095949, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: 723&;{sc
Any help or ideas would be appreciated.
Kevin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47585&t=47585
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
