I have run into the udp problem but in a differant scenerio. If you can get the 10 sites to work without adding the udp-disable to the main router I would do so otherwise being a global command you will have to touch them all.
Dave Mohsin Hussain wrote: > > I have main DLSW router connecting to 20+ peers. 10 Of those peers connect > via firewall. Since DLSW uses UDP unicast port 0 to establish circuit, > firewall drops the dlsw session. To fix this Cisco came up with solution to > disable the UDP using DLSW udp-disable. My question is could I configure > only those 10 affected routers and not configure the main router with this > command, or I configure all 20+ and the main router? > > http://www.cisco.com/warp/public/697/dlsw_udp.html > > Thanks, > > Mohsin -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48546&t=48516 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
