If you configured the VLAN on a server and VTP was up and running between the switches that should have worked.
All your switches can be servers if you like though I don't recommend it.. Dave GEORGE wrote: > > The switches were set to client and only one was set to server,however > when I added the vlan name to the server it did not propogate to the > other switches I wonder why? How many vtp severs can I have in one > domain > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > MADMAN > Sent: Thursday, July 18, 2002 1:06 PM > To: [EMAIL PROTECTED] > Subject: Re: FW: Help with vlan!! [7:49127] > > You have to be either transparent or server mode to add a VLAN. Were > you in client mode originally? > > Dave > > GEORGE wrote: > > > > I got it to work!!! > > The only thing I had to change was on the transparent mode add the > vlan > > and the name and it work, those this have to happen every time you add > a > > new vlan to the switch network....? > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf > Of > > Arlante, Neil > > Sent: Thursday, July 18, 2002 10:40 AM > > To: [EMAIL PROTECTED] > > Subject: RE: Help with vlan!! [7:49127] > > > > did u tried these: > > > > is it really trunking betw 3524 and 2900xl, or betw different > switches? > > sh > > trunk > > > > compare vtp revision numbers if they are the same...sh vtp domain > > > > see if vtp advertisements are sent and received... sh vtp statistics > > > > HTH, > > > > -----Original Message----- > > From: GEORGE [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, July 18, 2002 10:44 PM > > To: [EMAIL PROTECTED] > > Subject: Help with vlan!! [7:49127] > > > > I currently have just 2 vlan's in my network. The native 1 and vlan 2. > I > > have a 7513 doing the routing with a fast Ethernet and 3500xl and > 2900xl > > in my network. I have one vtp server and I added vlan 2 it works! . > > then I created another vlan 3 on the router with ip 10.0.4.1 isl > > encapsulation on it and add it to the vtp server. (3508xl) and name > it > > lab , doesn't work! I have trunking all the way here is a diagram of > my > > network > > (port1) > > 7513-----3524----trunking----2900xl---trunking---2900xl-users > > > > on the 2900xl that the users are connected I place switchport access > > vlan 3 on all the ports and made it a client with the proper vtp > > domain.. The other 2900 xl that's connected to my 3524 is also a > client > > with the correct vtp domain however when I do a show vlan I show vlan > 3 > > but a different vlan name not lab > > > > my question is what im I doing wrong? > > Do I have to configure a vtp server for each vlan? > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49171&t=49127 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
