Thanks all for the help. I've got the config in correctly and had it working fine for a little bit, but once I did a reboot the box acts very strange. Basically can't get console access back into the box without doing a default configuration (holding down the default button while booting)
To avoid the console issue, I set up telnet for the box and telnet to it when I can't get the console up, and when I do a show line it don't get the * next to the tty lines. It's very weird and I'm not sure if they are hung up or what. I've tried a clear line on the lines as well. here's my config. CS#sh conf Using 503 out of 32512 bytes ! version 9.21 no service pad service password-encryption ! hostname CS ! enable password 7 02050D480809 ! ! interface Loopback0 ip address 1.1.1.1 255.255.255.255 ! interface Ethernet0 ip address 192.168.1.99 255.255.255.0 ! ! line con 0 login line 1 16 no exec exec-timeout 0 0 stopbits 1 line vty 0 password 7 070C285F4D06 login line vty 1 password 7 13061E010803 login line vty 2 password 7 01100F175804 login line vty 3 password 7 060506324F41 login line vty 4 password 7 110A1016141D login ! end See what you guys think. Am I missing something obvious? I haven't played with the comm-servers much at all. thanks a lot! ""Mike Sweeney"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hmmmm... Mike's and mine are close.. but I run TACACS on mine since it faces > the public via a DMZ > > MikeS > > Current configuration: > ! > version 10.3 > service config > no service pad > service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname xxxxxxx > ! > boot system cs500-c-m.103-19a.Z.bin 192.168.50.29 > aaa new-model > aaa authentication login default tacacs+ enable > aaa authentication login old_way none > aaa authorization commands 1 tacacs+ if-authenticated > aaa authorization commands 15 tacacs+ if-authenticated > aaa accounting exec start-stop tacacs+ > aaa accounting network start-stop tacacs+ > aaa accounting connection start-stop tacacs+ > aaa accounting system start-stop tacacs+ > enable password 7 zzzzzzzzzzzzzz > ! > no ip domain-lookup > > ::snip::: Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49199&t=49071 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
