It's just one stream (the other users). You don't talk, send out your stream over the wan, have it come back to you.
""neil K."" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Steve, > > It makes sense to consider two RTP flows as a conversation consists of > full-duplex transmission. > both people speak at the same time in a normal conversation, so that is why. > please let me know if you have any thoughts on this > > neil > > ""Steven A. Ridder"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I'm not sure the context the document was written in, but it's only 24K > > (give or take depending on the L2 encap) that you need to plan for. > > > > Steve > > > > > > ""neil K."" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi All, > > > > > > Using the standard formulas, I see for a bandwidth required for a g.729 > > call > > > is 24kbps without RTP compression.I used to do the same when using other > > > codecs. > > > Recently I came across some VoIP documentation which said that you will > > have > > > to consider two RTP flows to simulate a call, and hence the requirement > > for > > > Bandwidth doubles.say g729 24 kbps becomes almost 48kbps if u consider > two > > > RTP flows. > > > > > > Any help will be highly appreciated. > > > > > > Thanks, > > > > > > Neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49406&t=49406 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
