I thought you said that this was a 2514. Don't they just have 10Mb Ethernet ports? Can you have sub-interfaces on a 10Mb port? Are you sure you are not using both ports on the 2514?
----- Original Message ----- From: "Frank H" To: Sent: Wednesday, July 24, 2002 2:55 PM Subject: RE: Proper network design? [7:49536] > Now I understand. I read a few articles on the Cisco site after searching > for the term "router on a stick" and found a good explanation. Thanks for > your help. > > Frank Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49566&t=49536 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
