When one does a "show process cpu", one is shown the overall information
and then the breakdown per process.
It's my understanding that the information shown on the summary line,
specifically for the 5 sec information ("30%/24%"), shows the total
CPU utilization and that which has been consumed handling interrupts.
In the above snipet, the CPU was operating at 30% utilization over
the last 5 seconds. A total of 24% of the overall utilization in the
last 5 seconds was handling interrupts (or at least that's my
understanding)
Does knowing the interrupt information help one determine anything about
the state of the router or the network?
Is it better (ie the network/router is healthy) if the interrupt value
is
closer to the overall CPU utilization or closer to 0?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49954&t=49954
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
