Crow, If the 2501 is set up for async, you can do this without any problem. You would need the 2501 to have a DCE RS232 cable.
The speed would of course be limited to what the AUX port can do. I haven't been able to locate anything saying whether that is 38400 or 115200 baud on a 4000M. What I have found suggests that it might be 38400. Also, every character that hits the aux port on a Cisco router generates a processor interrupt, so it's hard on the CPU. crow wrote: > > hi folks !! > > is there a way to connect a aux(4000m router) to a serial(2501) for > lab-purpose? > cable is available. i would say no. > thx in advance > andy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50075&t=50069 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
