I have PPPoE working on a 501 PIX no issues with 6.2.1. My MTU size is set to 1500 both inside and outside. I never adjusted the default settings.
mtu outside 1500 mtu inside 1500 Ronnie ""Rik Guyler"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Has anybody had a problem with PPPOE on a PIX 506 running 6.2(1) code? My > problem appears to be MTU-related - I can PING all day but HTTP only brings > up about a third of the sites I browse. There is a caveat in the docs about > MTU dropping to 1492 with PPPOE, which is supposed to happen automagically > but I tried to hard-code it and still the same problem. > > I opened a case with TAC but the engineer hasn't given me any good info. > 6.2(2) is out so I'll try to upgrade it Wednesday but I thought maybe > somebody else has run into this before. > > Rik Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50087&t=50085 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
