CallManager 3.1 and higher is certified on Compaq DL320, DL380, and IBM series 340, for sure. I assume that DL360, also, although I have no first-hand knowledge of that, and I beleive some HP server (I think even a Dell). These are just the servers that are supported using the Sperion Installation Utility for the OS. In actualality, you can run an OS patch on any server running W2K Server and then install CallManager itself on top. The manufacturer isn't nearly as important as the performance. That being said, I wouldn't install even a lab CallManager on anything less than P3-700 with 512 memory. Production *should* be over a gigahertz with a GB of memory. And I would recommend installing any other apps on the CallManger server, either.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50163&t=50142 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
