Here is what i want to do: configure nlsp without using the area-address 0 0 command.
What i have: an atm link between r1 and r2, the ipx network between those two is 64 What i tried : ipx router nlsp area-address 0 FFFFFF00 and i also tried ipx router nlsp area-addresss 60 FFFFFFF0 My understanding is that those two area-address commands should work for networks between 0 and 0xFF and networks 60 up to 0x6F respectively. Both should cover network 64. Conclusion, i am probably misunderstanding something. I tried to search on Cisco web site, my books and could not find anything helpful. Regards, DT Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50314&t=50314 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
