can you please paste a copy of your x25 debug? Regards, -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Pooja Thakur Sent: Friday, August 02, 2002 11:30 AM To: [EMAIL PROTECTED] Subject: X.25 switching on CISCO; Please help [7:50521]
Hello, I have a test setup where in 2 remote VSATs are configured as XPAD. An X.121 address is given to each RS-232 port on the 2 VSATs. The SVC sessions of the 2 remotes are defined on a X25 device at the Central Hub. Since this device cannot do switching, I have connected a CISCO 2500 to the X25 device. X25 device is X25 DTE while the CISCO is X25 DCE. I hv configured x25 routing on CISCO and given 2 x25 routes for the remote X.121 addresses with the next hop as the same serial interface to which the X25 device is connected. But when I make a call from one remot to another, the debug on the router says cannot route call. Can u help me out and suggest what sud I do to make this work. Thanx __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50575&t=50521 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
