A protocol analyzer would let you generate packets. Capture some RIP and IGRP updatess so you know what they look like, change and add network numbers, and then send them out again. A good analyzer will recalculate the IP checksum for you. (Also, the UDP checksum in the case of RIP).
Of course, if you could afford a good analyzer, you could afford some new routers too, though! ;-) Does anyone know if the free analyzers like Etherreal will let you generate packets? Priscilla Sparky Nelson wrote: > > What I am looking for is a Windows program that I can connect > to a Cisco > router that will send out RIP routing updates. Would love to > send out a a > group of 5 to 10different routes to illustrate routing without > using > loopback addresses. If I need to use loopbacks I will but would > prefer the > routes were coming into the rouing environment from an external > source > rather than an internal router. I figure it won't be hard to > get a RIP > simulator, I really don't expect to get anything that will send > IGRP routing > information because of the propritary nature of IGRP. > > Thanks, > > Kevin > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50597&t=50586 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
