Check the version of your boot ROM. Older versions only recognized certain Flash chips. If that is the problem you can contact Cisco for new ROMs. I believe you just have to pay for postage. Check the archives for details.
> -----Original Message----- > From: crow [mailto:[EMAIL PROTECTED]] > Sent: Friday, August 09, 2002 12:59 PM > To: [EMAIL PROTECTED] > Subject: flash probs [7:51071] > > > Hi group!! > > I have a problem gett running my new 8mb flash for 2501 router. > i got the flash with IOS 12.1 (15) already on it. > after i installed the flash, following error message occur: > > ERR: Invalid chip id 0x80B5 (reversed = 0x1AD ) detected in > System flash > > i tried already: > > erasing the flash > also: > >o/r 0x2101 > i > ena > conf t > config-regi 0x2102 > copy tftp flash > > but nothing works. > is there a possibility to erase flash in rx-boot mode? > i have no idea :( > need help !! > > thx in advance > andy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51075&t=51071 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
