I disagree. There are not 3 types of flows, just 3 ways to switch them.
"destination-ip—The least-specific flow mask. The MLS-SE maintains one
MLS entry for each destination IP address. All flows to a given destination
IP address use this MLS entry. This mode is used if there are no access
lists configured on any of the MLS-RP interfaces"
Note the use of the phrase "all flows" in the quote.
Turpin, Mark wrote:
>
> There types of flows:
> Destination - per {dest} flow
> Source Destination - per {source/dest address} pair
> IP (aka Full) Flow - per {source, dest, protocol and port} set
>
> Look under the section labeled Flow Mask Modes
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51322&t=51272
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
