Thanks. I was afraid of that.
Brad Ellis wrote: > > Ken, > > If memory serves, I dont think you can combine the PCMCIA flash > (I could be > wrong, it's been a while). I think you'll either > > a) need to get a 16MB PCMCIA card > or > b) get another 8mb double-sided flash for the system board > (assuming you > have a single 8mb double-sided flash in there already) > > thanks, > -Brad Ellis > CCIE#5796 (R&S / Security) > Network Learning Inc > [EMAIL PROTECTED] > www.optsys.net (Cisco hardware) > > ""Ken Corkins"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I have a 3620 with the following flash configuration; > > > > 8192K bytes of processor board System flash (Read/Write) > > 8192K bytes of processor board PCMCIA Slot0 flash (Read/Write) > > 8192K bytes of processor board PCMCIA Slot1 flash (Read/Write) > > > > > > Can I combine the two PCMCIA slots into 1 partition so that I > can install > a > > 16M IOS image? > > > > Thanks in advance. > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51376&t=51366 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
