Hopefully someone can help me with this problem.
I have three routers:
Router2501A: E0: 192.168.1.2/24
S0: 172.16.20.1/24
Router2502A TR: 172.16.30.2/24 (configured, but not up as I don't a T/R hub
S0: 172.16.20.2/24 (DCE back to back connection to
Router2501A, S0)
S1: 172.16.40.1/24 (DCE back to back connection to
Router2524A, S0)
Router2524A E0: 192.168.2.1/24
S0: 172.16.40.2/24
Each route has RIP installed on network 172.16.0.0. Each route is running
IOS 12.2(1d).
>From Router2502A, I can ping each end (192.168.1.2 and 192.168.2.1)
sucessfully.
>From Router2501A, I can only get to 172.16.20.2, S0 on Router2502A.
>From Router2524A, I can only get to 172.16.20.2, S0 on Router2502A.
A show protocol from each router shows each line up and each protocol
running.
>From each router when I do a show ip route command, I see that from
Router2501A, I only know about the two directly connected subnets.
>From Router2502A, I can see all routes.
>From Router2524A, I see all routes including 192.168.1.0, but I cannot ping
past 172.16.20.2.
I am sure this is something stupid, but I can't figure out the problem.
Thanks for any help.
Jack
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51483&t=51483
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
