-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 05, 2002 3:09 PM
To: [EMAIL PROTECTED]
Subject: Please confirm (conf#2e06a04082f0285f553f47e1f4613650)
Hi,
You have tried to post to GroupStudy.com's Professional mailing list.
Because
the server does not recognize you as a confirmed poster, you will be
required
to authenticate that you are using a valid e-mail address and are not a
spammer. By confirming this e-mail you certify that you are not sending
Unsolicited Bulk Email (UBE).
PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS
EMAIL
YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE
POSTED.
By confirming this e-mail you also certify the following:
1. The message does NOT break Cisco's Non-Disclosure requirements.
2. The message is NOT designed to advertise a commercial product.
3. You understand all postings become property of GroupStudy.com
4. You have searched the archives prior to posting.
5. The message is NOT inflammatory.
6. The message is NOT a test message.
To confirm, simply reply to this message. No editing is necessary.
Once
confirmed, you will be able to post without additional confirmations.
Welcome to GroupStudy.com!
------ORIGINAL MESSAGE---------
>From [EMAIL PROTECTED] Wed Jun 5 08:08:57 2002
Received: (from news@localhost)
by groupstudy.com (8.9.3/8.9.3) id IAA07886
GroupStudy Mailer; Wed, 5 Jun 2002 08:08:57 -0400
To: [EMAIL PROTECTED]
Path: not-for-mail
From: "Bulent Morten"
Newsgroups: groupstudy.cisco
Subject: Using an ISDN Line over an asynchronous interface with a
TA/NT1?
Date: Wed, 5 Jun 2002 15:09:49 +0300
Organization: GroupStudy.com Discussion Groups
Lines: 21
Message-ID:
NNTP-Posting-Host: 212.2.215.33
X-Trace: groupstudy.com 1023278936 7882 212.2.215.33 (5 Jun 2002
12:08:56 GMT)
X-Complaints-To: [EMAIL PROTECTED]
NNTP-Posting-Date: 5 Jun 2002 12:08:56 GMT
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.50.4807.1700
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700
Hello,
I have a Cisco Router 805 and a multitech ISDN TA/NT1 MTA128-NT.
According to references Cisco 805 is a TE2 and MTA128-NT is TA/NT1. I am
using a RS-232 - V35 SSI cable between devices. But I couldn't find any
configuration guidelines for this setup.
Is it possible to dial over an ISDN line with this devices? If not where
am
I mistaken?
any help will be appriciated.
Regards,
Bulent Morten
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51562&t=51562
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
