Hi All, Such a busy day..
configuring a 2509 with 2 modems connecting to async ports 1 and 2. The goal
here, is to simply dial out. Have a simple config,
Line Config of:
modem autodiscovery
modem inout
line 1-2
Group-Async 1
group range 1 -2
ip unnumbered loopback1
encaps ppp
async mode interactive
------
chat script mydialup ABORT ERROR ABORT "BUSY" " " "ATZ" OK "ATDT" \T connect
30 timeout
Whilst on the console, I try to start up a dial out conenction via my start
chat mydialup tty 1 555555 , however I get the following error
% Chat script can not be run on line running other process
Any one know whats happening ? This line is not in use any where else....My
sh line tty 1 has the following:
NAS_2509#sh line tty 1
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
* 1 TTY 19200/19200 - inout - - - 0 1 0/0 -
Line 1, Location: "", Type: ""
Length: 24 lines, Width: 80 columns
Baud rate (TX/RX) is 19200/19200, no parity, 2 stopbits, 8 databits
Status: Ready, Active, No Exit Banner
Capabilities: Modem Callout, Modem RI is CD,
Line usable as async interface, Modem Discovery
Modem state: Ready
Modem hardware state: noCTS noDSR* DTR RTS
Special Chars: Escape Hold Stop Start Disconnect Activation
^^x none - - none
Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch
00:10:00 never none not set
Idle Session Disconnect Warning
never
Login-sequence User Response
00:00:30
Autoselect Initial Wait
not set
Modem type is unknown.
Session limit is not set.
Thanks all for any assistance you can provide.
John
**********************************************************************
visit http://www.solution6.com
visit http://www.eccountancy.com - everything for accountants.
UK Customers - http://www.solution6.co.uk
*********************************************************************
This email message (and attachments) may contain information that is
confidential to Solution 6. If you are not the intended recipient you cannot
use, distribute or copy the message or attachments. In such a case, please
notify the sender by return email immediately and erase all copies of the
message and attachments. Opinions, conclusions and other information in
this message and attachments that do not relate to the official business of
Solution 6 are neither given nor endorsed by it.
*********************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51701&t=51701
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
