EIGRP does not recognize 0.0.0.0. Use ip default-network 192.168.1.0 instead, and then put network 192.168.1.0 under your router eigrp config. See Doyle vol. I pp. 756-758 for details. -gt
Robert Cluett wrote: > > I have the following network in my home lab: > > Internet Router----Eisenhower----Roosevelt----Nixon----Kennedy > > The Internet Router (192.168.1.1) runs RIP. Eisenhower > (E0:192.168.1.100 and S0:172.26.1.9) runs RIP and EIGRP. > Roosevelt, Nixon, and Kennedy run EIGRP for the > 172.26.1.0,172.26.128.0,192.168.3.0, and 192.168.4.0 networks. > I am peforming redistribution of EIGRP into RIP on the internet > router which also hosts my LAN of 192.168.1.0). I am unable to > propagate the default route out to the rest of the EIGRP > routers being Roosevelt, Nixon and Kennedy. Any one have a > clue on what I am missing? > > EISENHOWER CONFIG BELOW > > router eigrp 1 > passive-interface Ethernet0 > network 172.26.1.0 0.0.0.255 > network 172.26.128.0 0.0.0.255 > network 192.168.3.0 > network 192.168.4.0 > auto-summary > eigrp log-neighbor-changes > ! > router rip > version 2 > redistribute eigrp 1 metric 0 > passive-interface Serial0 > passive-interface Serial1 > network 192.168.1.0 > no auto-summary > ! > ip classless > ip default-network 0.0.0.0 > ip route 0.0.0.0 0.0.0.0 192.168.1.1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52379&t=52377 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
