Sure I remove the connection first before trying to deleting the IMA.....Have you any other suggestions?
BR, Komy ""YASSER ALY"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Have you configured any connection over this Imagroup ? > > If yes, then you need to remove the connection first before deleting the > Imagroup. > > If not, feedusback. > > Regards, > > Yasser > > > > Regards, > > Yasser > > >From: "Mohamed Elkomy" > >Dear all, > >I've a problem when trying to > delelte an IMA group on MGX 8250....First of >all I try the following : > > >1- delport (port no.) > > Error occurred during the SNMP SET operation > !! >Probable Reason : "Port is disabled" >SNMP Error Code : 29 > >but > when I make "sh port (port no.)".....the port status in enabled. > >2- > delimagrp (IMAGrp no.) > > Error occurred during the SNMP SET operation > !! > Probable Reason : "Failed to delete Port-Controller resource > partitions >existing on this port" > SNMP Error Code : 6 > >3- > dellnsfmimagrp (IMAGrp No.) (list of links) > > Error occurred during the > SNMP SET operation !! > Probable Reason : "delete links: #of links > becoming less than P:n" > SNMP Error Code : 6 > >This IMAgrp is simply > consisting of one link and i'm trying to delete this >link and delete the > IMAGrp ....so what's wrong with what I did.....and >what're the proper > steps for deleting the line and the whole IMAgrp. > >Thks/BR > Komy > > > > misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > ------------------------------------------------------------------------ > > Send and receive Hotmail on your mobile device: Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52477&t=52472 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
