the proper way to do this is to use the "archive" command. check out the documentation at:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/1219ea1/3550scg/sw iosfs.htm watch the wrap. this is one of the new ways of doing things. copy tftp flash will work, but then the image doesn't load. been there. been frustrated by that. this is one of the things that starts to make sense after you've fooled with the OS a bit. bit it is contrary to what you learned on routers. the archive command format is much more unix-like thank goodness there is no more troubleshooting in the CCIE Lab!!!! :-> -- www.chuckslongroad.info like my web site? take the survey! ""Juan Blanco"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Team, > I just got a 3550 switch(current smi image), I am trying to put the new emi > image but I am getting the following error...What I am doing wrong.... > > Switch#$downnload-sw tftp://192.149.64.17/c3550-i5q3l2-mz.121-11.EA1.bin > examining image... > Loading c3550-i5q3l2-mz.121-11.EA1.bin .from 192.149.64.17 (via Vlan1): ! > %Tar checksum error in tftp://192.149.64.17/c3550-i5q3l2-mz.121-11.EA1.bin > %Error opening flash:update/info (No such file or directory) > ERROR: Image is not a valid IOS image archive. > Switch# > > > Thanks.... > > JB Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52876&t=52807 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
