Andy,
This is a problem for Q Man! (whoever and wherever he is)
But seriously, maybe we could work this one out on the list.
May I suggest that you use the "modular QoS CLI". This involves
three steps:
First, classify the packets using ACLs and the class-map command.
Second, apply actions to the class using the policy-map command.
Third, attach the policy to an interface (input or output).
Fourth, enjoy your network.
Anyone else want to take it from there?
-- TT
-------- Original Message --------
Subject: QOS ?? help needed [7:52961]
Date: 10 Sep 2002 00:17:37 -0000
From: [EMAIL PROTECTED] ("crow")
Organization: GroupStudy.com Discussion Groups
Newsgroups: groupstudy.cisco
Hi Group,
i am having problems to solve the following scenario.
kabelmodem - (E0)router2501(E1) -
witch - win2k-pro (private address range)
( internetaddress ) ( using
- win2k-server (private address range)
i want to prefer udp-packets with port xxx over all other traffic (specially
http)
(leaving the win2k-pro in direction to kabel-modem, with all other traffic i
mean traffic from win2k-pro and win2k-server,
specially http)
is this possible?
i tried priority-queueing:
priority-list 1 protocol ip high list 120
priority-list 1 protocol ip normal
priority-list 1 protocol ip low tcp www
access-list 120 permit udp host 10.0.0.2 any range xxxx xxxx
int e 0
priority-group 1
but the result wasn' t efficient.
also i tried route-maps with precedence flash-override as high and routine
as low,
but i dont know whether it is the right way solving the prob nor the
configuration works.
i was searching on the cco and trying to solve the problem for many hours.
i need your help. any suggestions?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52964&t=52961
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
