Hi.. sorry me again, I found I can log to my syslog server now, but I want to know when I change a port from speed 100 to auto, the syslog server only record part of the log as shown below, it doesn't record port2/8 speed set to auto ?? why ???
Cat55-L7-1> (enable) set port speed 2/8 auto 2002 Sep 10 14:02:00 Singapore +08:00 %SYS-6-CFG_CHG:Module 2 block changed by telnet/100.1 00.100.9/ Port(s) 2/8 speed set to auto detect. [root@syslog rabo]# Sep 10 12:48:11 cat557.sin.ap.rabobank.com 2002 Sep 10 14:02:00 Singapore +08:00 %SYS-6-CFG_CHG:Module 2 block changed by teln et/100.100.100.9/ [root@syslog rabo]# -----Original Message----- From: Sim, CT (Chee Tong) Sent: Tuesday, September 10, 2002 1:36 PM To: '[EMAIL PROTECTED]' Subject: why my 5505 switch doesn't log to syslog?? Hi.. I have a catalyst 5505 switch and I had type in the following command set logging server 100.100.100.10 set logging server enable set logging server facility LOCAL4 set logging server severity 7 But it end up with the following config. I don't know why it has so many entries. Besides, there is no config showing the command "set logging severity 7" that I have typed. And I can't clear those extra by the command i.e. "clear logging level cdp 4 default" #syslog set logging console enable set logging server enable set logging server 100.100.100.10 set logging level cdp 4 default set logging level mcast 2 default set logging level dtp 5 default set logging level dvlan 2 default set logging level earl 2 default set logging level fddi 2 default set logging level ip 2 default set logging level pruning 2 default set logging level snmp 2 default set logging level spantree 2 default set logging level sys 5 default set logging level tac 2 default set logging level tcp 2 default set logging level telnet 2 default set logging level tftp 2 default set logging level vtp 2 default set logging level vmps 2 default set logging level kernel 2 default set logging level filesys 2 default set logging level drip 2 default set logging level pagp 5 default set logging level mgmt 5 default set logging level mls 5 default set logging level protfilt 2 default set logging level security 2 default set logging level radius 2 default set logging level udld 4 default set logging level gvrp 2 default set logging server facility LOCAL4 ! But for the other switch , it is working. Why they are different ?? #syslog set logging server enable set logging server 100.100.100.10 set logging server facility LOCAL4 set logging server severity 7 ! Thanks in advanced ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52970&t=52970 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
